Wiha Voltage and continuity testers 0.5 – 1,000 V AC, CAT IV incl. 2x AAA batteries (45217)
Increases flexibility : Covers the relevant voltage ranges for electricians.
Makes work easier : Large LCD display with bar graph and backlight, LED scale and signal tone for easy-to-read measurement results.
Makes work easier : An integrated flashlight function ensures optimal lighting conditions.
Fulfills your wishes : Fault current release control with two load buttons.
Dimensions : 240 x 75 x 30 mm
Application : For ascertaining stress relief.
Application : For voltage test, continuity test, rotating field test and resistance measurement incl. testing of residual current circuit breaker in accordance with the standards.
Measurement category : CAT III up to 1,000 V and CAT IV up to 600 V.
Standard : IP 64. CE certified.
Safety rule: Check that the voltage is switched off! The voltage and continuity tester from Wiha is the perfect daily companion to easily check the prerequisites for this safety rule, and it helps you with many tasks in everyday life. It makes it possible to test voltage within a large measurement range from 0.5 V to 1,000 V AC or 1,500 V DC. In addition, the voltage tester has the option of a continuity test, optical rotating field control, single-pole phase test and automatic polarity recognition. In addition, resistance measurements and frequency measurements can be carried out. The measurement results can be read immediately thanks to a large digital LCD display with backlight and an LED display. An additional beep signals current flow during a pass test. In addition, tests on sockets can be carried out easily and conveniently with one hand using the integrated spacer. In addition, the voltage tester from Wiha ensures optimal lighting conditions, even in working environments with poor lighting, thanks to the integrated flashlight function. By simultaneously pressing the buttons on both of the test probe handles, you can carry out a functional check of the residual current circuit breaker by connecting a load. According to the measurement categories CAT III up to 1,000 V and CAT IV up to 600 V, the voltage and continuity tester from Wiha provides maximum safety during work on building installations as well as directly on the sources of the low-voltage installation.
To the electrician
IEC 61243-3:2014
-
- Total length: 282 mm
- Width: 110 mm
- Height: 50 mm
- Voltage V AC (min.): 0.5
- Voltage V AC (max): 1000
- Voltage V AC min. - max.: 0.5 - 1000
- Voltage V DC (min.): 0.5
- Voltage V DC (max): 1500
- Voltage V DC min. - max.: 0.5 - 1500
- Frequency (Hz): 950 Hz
- Resistance (Ω): 1999 Ω
- Degree of soiling: 2
- FI test: Yes
- Suitable for photovoltaics: Yes
- Integrated flashlight: Yes
- Non-contact voltage test: Yes
- : LCD overflow display OL
- : LCD overflow display OL: LED ELV display > 50 V AC, > 120 V DC
- LCD range: 0.5 V to 1,000 V AC, 0.5 V to 1,500 V DC
- Own time: < 0.5 s LED und < 1 s LCD
- LCD resolution: 0.1 V (< 10 V) und 1 V (> 10 V)
- LCD accurate: +/- 3%, +/- 3 Digits (< 10 V) und +/- 3%, +/- 5 Digits (> 10 V)
- Humidity: max 85% RH
- Safety current: Is < 3.5 mA (At 1,000 V)
- Measuring function: 30 s ON (Betriebszeit), 240 s OFF (Recovery time)
- Battery consumption: approx. 80mA
- Altitude above NN: 2000m
- Rotating field test: 170 - 7,000 V Phase to Phase AC 40-70 Hz
- Single-pole phase test: 100 - 1.00 V AC (40 to 70 Hz)
- Measurement category: CAT IV 600 V / CAT III 1,000 V
- Display: LED and LCD Display
- Turn field display: LED L, R
- Pass-through testing: LED und akustischer Ton
- Diode test: 0 - 2 V
- Protection class: IP 64
- Operating temperature: -15°C - 50°C
- Storage temperature: -20°C - 60°C
- Acoustic signal: Yes
- With battery: Yes
Specifications
| Brand | WIHA |
|---|---|
| EAN | 4010995452179 |
| ESD Safe | No |
| Display | Yes |
| Part number | 45217 |